This fourth installment in our multi-part series exploring micro pulse arc welding (micro TIG welding) focuses on “Touch Start” technology, which requires much lower voltage than the standard DC start system. Low voltage operation means no high frequency noise emission.
This is the third entry in our multi-part series exploring micro pulse arc welding welding. Today we will cover troubleshooting – tips for improving your results when you’ve followed all the recommended setup tips and you’re still getting spurious results, inconsistencies, or part shrinkage.
This is the second in our multi-part series exploring pulsed micro tungsten inert gas (TIG) welding. Today we will cover setup tips and tricks.
Today, we are embarking on a 7-part series exploring pulsed micro tungsten inert gas (TIG) welding, also known as micro pulse arc welding. In our first installment, I’ll cover general features of a pulsed micro TIG system, and review the welding applications for which it is best suited. Later blog posts will cover setup tips, improving TIG results, touchstart, pulsation, monitoring, and safety.